Want to see what we've been working on lately? Take a look for the latest projects, updates, and information on our services.
This has been one of the most beautiful remodels we have worked on. We were proud to be a part of this project.
We were hired to relocate the ducting and electrical in order to install this powerful yet elegant range hood. At 390cfm, it's sure to get rid of all the unwanted steam and smoke.
What initially started as a home inspection repair request turned into so much more. I very much enjoyed working with this client as I had a ton of flexibility and a no-rush attitude. While the stairs took me a bit longer than anticipated, the picture looking down is one of my favorites to date.
A client told me that they no longer wanted the ancient projection TV recessed media area in their home.
I set about to frame it all in with 16"oc stud spacing in preparation for a new media cabinet and to hang the TV. Here is my journey
One of my favorite homes, this historic home built in 1928 in Floral Park has a very tight laundry room and needs a more efficient use of their space. I, admittedly, did not take a lot of pictures during this build. But here are a few pieces of information about this project:
There is a window directly to the left which meant that putting an enclosed shelf or cabinet against the window, even with a gap, just wouldn't look right. We opted for a rounded corner floating shelf design. For this I used 0.75" melamine pressed board. I rounded the corners w/ a 4" radius and then ran a 0.25" dado for the 3 shelves and glued/screwed the shelves together from behind. I then attached the shelves to the cabinetry and secured it all to studs. Next up was the countertop. My client had originally requested stone, but it was a little out of budget so we opted for 0.75" maple ply (doubled up) w/ a 1.50" chair rail to finish the edging and 0.50" quarter round for the joints. I inserted a 2" grommet for the power supply to the w/d and left a square open in the back to service the washer and dryer supply/drain lines if necessary. Lastly, I built a 7.25"x39.5"x15.75" adjustable shelf cabinet to maximize the space between the washer and dryer as well. We didn't leave any available space open.
One of my clients called me and mentioned she was expecting. I couldn't have been happier for them. She needed to enclose their existing loft space in their 1br/1.5ba condo to use as a nursery. We made a plan and set out to complete it. She always wanted a barn door and after finding just the right one, we got going!